IPSentry - Server Settings
When adding or modifying a device to monitor, you will be presented with the IPSentry Machine Options Editor which contains various selections required to define the item being monitored.
From this area, you will be selecting the type of monitored item as well as the various alert and notification options specific to the entry.
Some important information to keep in mind when configuring server settings relates to the "types" of monitoring items located on the left hand side of the Server Settings tab.
Network
Signifies that you will be monitoring a TCP/IP accessible device. This
device can be a standard item such as PING, HTTP, SMTP, POP3, etc.
This device can also be non-standard or experimental using custom port
settings such as a web server accessible only on port 8080 or a telnet login
request test to a router.
You should check this device type if the item being monitored listens on a
given port for an incoming connection and either accepts data or transmits
data on that TCP/IP connection.
Drive
Signifies that you will be evaluating drive space (in bytes) on a local
drive or network accessible storage device. You may access the device
using either a pre-mapped drive letter designation, or by using a UNC share
specification (eg. \\MYSERVER\MYSHARE\
)
In either case, you will be configuring the lower limit of drive space
allowed before triggering any defined alerts.
NT Service
Signifies that you will be checking an NT system on your network and
evaluating a specific service to ensure that it's status is
"Running". IPSentry MUST be running under a security context
allowing access to the remote systems service control manager either by way
of specific user rights and/or trust relationships.
Add-In
This is by far the most confusing option on this tab. You will notice
that on the Machine Options Editor window, there is also a tab named
"Add-In". (We changed it to Add-In Alert).
If you will be using an add-in to "monitor" something, you will
configure that add-in under the "Server Settings" tab. You
will NOT configure the add-in under the "Add-In" tab.
Note: The Add-In tab is used only for add-ins that are designed to
"react" or "alert" based on the results of a monitoring
task.
In all cases, the input fields will change to accommodate the information required to perform the specified monitoring action as each of the device types will require information that is unique to that activity.
|
||
Contact: support@ipsentry.com | https://ipsentry.com | © 2006 by RGE, Inc. - All Rights Reserved |